Like many people, I deal with a lot of email every day. Something that makes it much easier to deal with is when people quote properly. Here are some guidelines (originally prepared for 139.177 / 119.177) for effective email quoting. Quoting works best if you work with plain text email and not HTML - many people prefer this, anyway, so it’s a good idea to stick with it unless you have a good reason not to. There are many varients of good quoting styles, only one of which is presented here. It doesn’t really matter which you use, as long as you use one. Why you should quote properly To put it most briefly, RFC1855 (Netiquette Guidelines) states that:

If you are sending a reply to a message or a posting be sure you summarize the original at the top of the message, or include just enough text of the original to give a context. This will make sure readers understand when they start to read your response.

Firstly, you must quote in some way - even if it is top-posting, that’s better than not quoting at all. It may be some time before the message is dealt with, or since the original was read, so having the (relevant portions of the) original message immediately accessible is essential. It also makes it easier to understand which parts of your reply are responses to which parts of the original message(s), avoiding confusion and mistakes. You should try not to top-post, however. This is when you write your reply above the quoted original message. This is seriously destructive to mailing-list digests, where multiple levels of top-posting are difficult to skip. When mailing to just about any address other than personal ones, it is difficult to tell if some users may be receiving the message as a digest, so you should assume that someone is. You can get away with top-posting in personal one-to-one email, but should always avoid it otherwise. Other reasons to bottom-post include:

  • In normal conversations, one does not answer to something that has not yet been said. So replying at the top, whilst the original message is at the bottom is unclear.
  • In Western society, a book is normally read from top to bottom. Top-posting forces one to stray from this convention: reading some at the top, skipping to the bottom to read the question, and going back to the top to continue. This annoyance increases more than linearly with the number of top-posts in the message.
  • It helps with correct identification of the person to whom you’re replying.
  • It helps with correct attribution of the quoted text to the original author and of the new text to you (like academic style citing).
  • It helps keep multi-person discussions clear and easy to understand.

Examples To make it clear, here are good & bad examples. Firstly, here is a message that we will reply to:

Hi,

I'm having trouble with exercise 7.6.  I can't seem to understand what
the point of doing a Says/Does table for this exercise is, and how it
will help.  I'm also not sure how much I need to know about tofu.

Thanks,
Erik

Below is an example of top-posting. The complete original message is quoted and the response is at the top. This makes the message hard to read.

Hi Erik,

A Says/Does column will both help you understand what the author is
trying to say, and help you summarise the article.

You don't need to know anything about tofu for the article, it's just
there as an example.

Cheers,
Peter

Erik wrote:
> Hi,
>
> I'm having trouble with exercise 7.6.  I can't seem to understand what
> the point of doing a Says/Does table for this exercise is, and how it
> will help.  I'm also not sure how much I need to know about tofu.
>
> Thanks,
> Erik

The correct response would look something like this:

[Erik]
> I'm having trouble with exercise 7.6.  I can't seem to understand what
> the point of doing a Says/Does table for this exercise is, and how it
> will help.

A Says/Does column will both help you understand what the author is
trying to say, and help you summarise the article.

> I'm also not sure how much I need to know about tofu.

You don't need to know anything about tofu for the article, it's just
there as an example.

Cheers,
Peter

Note that the responses directly follow the questions, and any unnecessary text has been cut. It is often useful to summarise a question or previous discussion. To do this, put your summarisation between square brackets []:

[Erik, confused about Says/Does tables]

A Says/Does column will both help you understand what the author is
trying to say, and help you summarise the article.

> I'm also not sure how much I need to know about tofu.

You don't need to know anything about tofu for the article, it's just
there as an example.

Cheers,
Peter

With multiple correspondents, good quoting is even more important.

[Erik]
>> I'm having trouble with exercise 7.6.  I can't seem to understand what
>> the point of doing a Says/Does table for this exercise is, and how it
>> will help.

[Peter]
> A Says/Does column will both help you understand what the author is
> trying to say, and help you summarise the article.

It will also help you when it comes time to write a summary of the article,
as you can use the 'Does' portion to figure out which are the most
important bits, needing to be in the summary.  You can then use the 'Says'
portion to form the basis of your first draft of the summary.

Cheers,
Sally

Those greater-than signs [section added 2nd March 2006] Traditionally, quoted material was prefixed with greater-than signs (or some other symbol) to distinguish between it and regular text. Ideally, each participant in the conversation has a different number of signs (and the number of signs indicates the order of the mesages). A problem with this is when lines wrap around and not every line starts with the character (although with careful composition it is easy enough to avoid this). A modern mail client (e.g. Apple’s Mail) instead suppresses the greater-than characters and shows some other symbol (e.g. a vertical line) instead. More importantly, if you quote using the mailer’s quoting system, it will use the “format=flowed” system to indicate which text is quoted. So you should always do that rather than manually typing greater-than signs and putting in returns where possible. Unfortunately, not that many mailers support this feature. In particular, Microsoft Outlook and Microsoft Outlook Express do not (although Hotmail does, so it’s possible that Outlook and Outlook Express will in the future). If you’re using Mozilla Mail (and Thunderbird?), Eudora, M2 (Opera’s mail client), or Apple’s Mail, then you’re fine, however. Other resources

Terms In case you are not familiar with some of the terms used above, here are links to some explanations (thanks to Wikipedia):

technorati tags: Email